Best Font for a Cover Letter: Typeface, Size and Spacing

By Roy10 min read

Nobody gets hired for a font, but a cover letter in the wrong one looks careless before the first sentence is read. University career offices publish only a few formatting rules for cover letters, and they agree with each other. This page collects them, with the exact wording, and turns them into a setup you can copy.

What career offices actually specify

Most cover letter font advice online is opinion. These are the rules that universities put in writing. Each quote is from the linked page.

SourceRuleIn their words
MIT Career Advising & Professional DevelopmentFont size and length"A cover letter should be no longer than one page with a font size between 10-12 points."
UC Berkeley Career EngagementMatch the resume"It is recommended that the cover letter have the same format style as your resume"
Purdue OWLLine spacing"Single-space your cover letter."
Purdue OWLMargins"Use standard margins (one-inch margins, usually)."
UW–Madison Writing CenterLayout"Use conventional business correspondence form."

None of these pages names a single correct typeface. The size range, the one-page limit and the match with your resume are the parts they commit to. So the question "which font" has a short answer: whichever plain font your resume already uses.

Cover letter fonts that are safe to use

A cover letter is a business letter, so the font should be one a reader has seen thousands of times. The two Microsoft defaults are the lowest-risk choices. Microsoft's typography documentation says "Calibri became the default font in Office in 2007" and describes it as "an extremely readable sans serif text typeface". Its page for Aptos says type designer Steve Matteson designed it "as a new default Office font to replace Calibri".

FontStyleSuggested body sizeGood for
CalibriSans-serif11 or 12 ptAny industry; the long-time Word default
AptosSans-serif11 ptLetters written in current Microsoft 365
ArialSans-serif10.5 or 11 ptLetters that will be read on screen
HelveticaSans-serif10.5 or 11 ptMac users who want a clean sans-serif
GeorgiaSerif10.5 or 11 ptA traditional look that stays readable on screen
GaramondSerif12 ptLaw, academia, publishing; it runs small, so size up
CambriaSerif11 ptA serif that pairs with Word headings
Times New RomanSerif12 ptConservative fields and formal applications

The suggested sizes are our rule of thumb inside MIT's 10 to 12 point range. Fonts drawn with small lowercase letters, such as Garamond and Times New Roman, look smaller than Arial at the same point size, so they sit at the top of the range. The resume font size guide explains why two fonts at one size look different.

Serif or sans-serif is a matter of taste. If your resume uses one of the fonts in the resume font guide, use it for the letter too.

Font size: stay between 10 and 12 points

MIT's range is the one to follow: 10 to 12 points. Inside it, 11 points is the usual choice for sans-serif fonts and 12 points for the smaller-looking serifs.

When a letter spills onto a second page, most people shrink the font first. Do that last. Work in this order:

  1. Cut words. Our cover letter length guide puts the target at 250 to 400 words. A letter over one page at 11 points is nearly always too long, not too large.
  2. Narrow the margins. Purdue OWL allows it: you "can use smaller margins (to about 0.7-inch) as long as you are consistent on all sides."
  3. Drop the size by half a point, and stop at 10. Below that you are outside the range every source above gives.

The reverse problem is a short letter with large type to fill the page. Leave it short. White space under your signature is normal in a business letter.

Your name in the header can be larger than the body, as it is on your resume. Everything else, including the date, the employer's address, the greeting and the sign-off, stays at body size.

Match the cover letter to your resume

Berkeley's advice is the most useful rule on this page: the cover letter should share the resume's "same font and font size, and same margins". The two documents arrive together and are usually opened one after the other. When they match, they look like one application. When the resume is in Calibri and the letter is in Times New Roman, it looks like the letter was written for a different job.

  1. Read the settings off your resume

    Open your resume, click in a body paragraph and note the font name and size. Then check the margins (Layout > Margins in Word; File > Page setup in Google Docs).

  2. Copy the header

    Paste your resume's name and contact block at the top of the letter. Keep it in the body of the page, not in the document header area.

  3. Set the body font and size

    Select the whole letter and apply the resume's body font and size. If your resume body is below 10 points, use 10 for the letter.

  4. Set margins and spacing

    Match the resume's margins, or use one inch. Set line spacing to single, with one blank line between paragraphs and no first-line indent.

  5. Fit it on one page

    If it runs over, cut words, then narrow the margins to no less than 0.7 inch, then reduce the size to no less than 10 points.

  6. Export and check

    Save as PDF unless the posting asks for Word. Open the PDF and try to select a sentence with your cursor. If you can, the text is real text and not an image.

Spacing and margins that go with the font

Font choice does less for readability than spacing does. Purdue OWL's rules are short: "Single-space your cover letter" and "Leave a space between each paragraph." It also notes that "the basic format of a cover letter follows that of a business letter", which means left-aligned text, no indents and a blank line between blocks.

SettingUseSource
Line spacingSinglePurdue OWL
Between paragraphsOne blank linePurdue OWL
MarginsOne inch; 0.7 inch at the least, equal on all sidesPurdue OWL
LengthOne pageMIT, Purdue OWL, UW–Madison
AlignmentLeft, in business-letter formPurdue OWL, UW–Madison

Avoid justified text. It stretches the spaces between words on short lines, and a one-page letter has many short lines.

Whether the font matters to an applicant tracking system

Less than people fear. Greenhouse publishes a list of reasons a resume fails to parse, and no font appears on it. The list covers resumes, not cover letters, but it shows what a parser trips on. Two items relate to type:

  • "A resume with spaces between the letters." Letter-spaced headings such as "C O V E R L E T T E R" are read as separate characters.
  • "Resumes that are uploaded as an image, rather than a document (such as a .docx or .pdf)". A letter exported as a picture has no text for the system to read, whatever font it shows.

Greenhouse ran the careers site at 23 of the 503 S&P 500 companies (4.6%) in the ATS Resume AI analysis of all 503 S&P 500 careers sites and 9,260 live job postings, June 2026 (breakdown); Workday led with 87 (17.3%). Workday doesn't publish an equivalent list, so Greenhouse's is the best public baseline.

One more case: some application forms give you a text box for the cover letter. Anything pasted there is shown in the form's own font, so your choice disappears. Paste plain paragraphs and check that the line breaks survived.

Fonts and styles to avoid

  • Script and handwriting fonts. They are hard to read at body size and look out of place in a business letter.
  • Novelty fonts such as Comic Sans or Papyrus.
  • Condensed or light weights. They save space by making the letter harder to read, which defeats the point.
  • Monospaced fonts such as Courier. They take more room per word, so a one-page letter becomes two.
  • A second or third font. One font for the whole letter. Use bold for your name and nowhere else.
  • Colored body text. Black on white prints and photocopies cleanly.
  • Fonts you downloaded. If you send a Word file and the reader doesn't have the font, Word swaps in another and your one page may become two. A PDF avoids this.

When the cover letter is the email itself

If the posting says to email your application, the email can be the cover letter. Don't set a font in that case. Mail apps show messages in their own default font, and custom fonts and sizes can arrive changed or stripped. Write plain paragraphs, keep the same content and length, and attach the resume as a PDF. If you attach the letter as well, format the attachment as described above.

A note on the wording

A matching font makes the letter look finished. What gets it read is whether it speaks to the posting. If you draft with AI, the ChatGPT cover letter guide has prompts that keep the letter specific. ATS Resume AI also writes a cover letter from your resume and the job description; the full letter and the PDF and Word downloads are part of the Pass ($1.95 for 7 days, then $19.95 every 4 weeks until cancelled), and the free trial (3 days, 5 AI rewrites, no card) shows your ATS score and keyword gaps first.

Sources


Frequently asked questions

Should my cover letter and resume use the same font?
Yes. UC Berkeley's career office recommends that the cover letter have the same format style as your resume, including the same font, font size and margins. The two files are read together, so matching them makes the application look like one piece of work.
Is 12-point font too big for a cover letter?
No. MIT's career office gives 10 to 12 points as the range, so 12 is the top of normal. It suits fonts that look small, such as Garamond and Times New Roman. In Arial or Calibri, 12 points is fine if the letter still fits on one page.
Is Times New Roman still acceptable for a cover letter?
Yes. It is a standard business-letter font and is still expected in conservative fields such as law and government. Set it at 12 points because it looks smaller than sans-serif fonts at the same size, and use it on your resume as well so the two documents match.
Should a cover letter be single or double spaced?
Single spaced. Purdue OWL's formatting tips say to single-space the letter and leave a space between each paragraph. Double spacing pushes a normal-length letter past one page.
Can I make the font smaller to fit my cover letter on one page?
Only as a last step, and not below 10 points. Cut words first, then narrow the margins. Purdue OWL allows margins down to about 0.7 inch as long as all sides are equal. A letter that needs 9-point type is too long.
What font should I use if I paste my cover letter into an application form?
None. A text box in an application form displays your letter in the form's own font and drops your formatting. Paste plain paragraphs, then check that the paragraph breaks are still there before you submit.
Check my resume — free →